New ZealandReliance has looked after us really well , and most because of your good service and products quality.
LebanonYou did show a full professional way of doing business industrial deal. Im very happy that i have the opportunity to cooperate with u and ur company.
MexicoQuick response,good price, excellent delivery date and service, of course, the best quality.
A179 Seamless Carbon Steel Heat Treated Tube For Heat Exchanger
|Company Type||Manufacturer, Importer & Exporter||Fin Tube Type||U Tube|
|Process||Cold Bend||Tube Material||Carbon Steel, Stainless Steel, Alloy Steel, Copper Etc...|
|Heat Treatment||YES||Tube Length||No Limit|
A179 Seamless heat treated tube,
Cold bend heat treated tube,
A179 heat treated pipe
A179 seamless carbon steel heat treated heat exchanger U Tube bundles
More Standard and Grade:
ASTM A210/ASME SA210 A1
ASTM A213/ASME T11 T22
BS3059 BS6323-4 BS3602-1
EN10297-1 EN10305-1 EN10216-1 EN10216-2 EN10210-1
DIN1629 DIN1630 DIN 17175 DIN2391 DIN17204 DIN2448
JIS G3452(SGP) JIS G3461JIS G3462 JIS G3454JIS G3455 JIS G3444
Seamless (Cold Drawn)
Plain ends or bevel ends
Straight Tubes Maximum Length:
(Before Bending): 35000 mm.
Unit Leg Length
Min 1 Meter, Max. 16500 mm (For Max R=1500mm)
Stress Relieved After U-Bending (Bending Area Plus 300MM For Each Leg).
Hydrostatic Test After U Bending
Maximum Test Pressure 600 Bar, Holding time: 10 Sec.
Medium: Dematerialized Water.
Compressed Air Cleaning After Hydro-Test.
In Strong Transport-Worthy Pre-fumigated wooden boxes of corresponding dimensions for
each tube Length, Radius, Diameter, According To PO requirements as well as wrapped In polyethylene
films With soft plastic caps on both end of Tube.
General Quality Tests
|Corrosion Test||Conducted only when specially requested by the client|
|Chemical Analysis||Test done as per required quality standards|
|Destructive / Mechanical Testing||Tensile | Hardness | Flattening | Flare | Flange|
|Reverse-bend and Re. flat tests||Carried out in full compliance with relevant standards & ASTM A-450 and A-530 norms, which ensures trouble-free expansion, welding & use at customers end|
|Eddy Current Testing||Done to detect homogeneities in subsurface by using Digital Flaw-mark Testing System|
|Hydrostatic Testing||100% Hydrostatic Testing carried out according to ASTM-A 450 norms for checking tube leakage, and biggest pressure we can support 20Mpa/7s .|
|Air Under Pressure Test||To check any evidence of air leakage|
|Visual Inspection||After passivation, every single length of tubes & pipes is subjected to thorough visual inspection by trained staff for detecting surface flaws & other imperfections|
Supplementary Testing : Apart from the above mentioned tests, we also carry out on the manufactured products supplementary testing. The tests conducted under this include: